Rubber Tubing
Gaskets, washers, bushings can economically be fabricated from extruded rubber tubing. This process of fabrication eliminates any necessity for expensive molds. For critical requirements, the use of mandrels for cutting and grinding is recommended.
Our engineers are trained to recommend the proper method when they are familiarized with your requirements.
- Commercial Tolerances
- Standard Tolerances
- Close Tolerances
- Square Cut
- Special Cut
- Ground O.D.
ST 6011
ST 6014
ST 6021 |
ST 6010 |
| Material |
"A" Durometer |
| Natural Rubber |
30 to 90 |
| Neoprene |
40 to 95 |
| NBR |
40 to 90 |
| Butyl |
40 to 75 |
| EPDM |
40 to 90 |
| Silicone |
40 to 85 |
| Hypalon |
40 to 95 |
| SBR |
40 t0 90 |
| I.D. |
WALL |
| 1/32 |
1/32, 3/64 |
| 1/16 |
1/32, 3/64, 1/16 |
| 3/32 |
1/32, 3/64, 1/16 |
| 1/8 |
1/32, 3/64, 1/16, 3/32, 1/8, 3/16 |
| 5/32 |
1/32, 3/64, 1/16, 3/32, 1/8, 3/16 |
| 3/16 |
1/32, 3/64, 1/16, 3/32, 1/8, 3/16, 1/4 |
| 7/32 |
1/32, 3/64, 1/16, 3/32, 1/8, 3/16 |
| 1/4 |
1/32, 3/64, 1/16, 3/32, 1/8, 3/16, 1/4 |
| 9/32 |
1/32, 3/64, 1/16, 3/32, 1/8, 3/16 |
| 5/16 |
1/32, 3/64, 1/16, 3/32, 1/8, 3/16, 1/4 |
| 3/8 |
1/16, 3/32, 1/8, 3/16, 1/4 |
| 7/16 |
1/16, 3/32, 1/8 |
| 1/2 |
1/16, 3/32, 1/8, 3/16, 1/4 |
| 9/16 |
1/16, 3/32, 1/8 |
| 5/8 |
1/16, 3/32, 1/8, 3/16, 1/4 |
| 11/16 |
3/32, 1/8 |
| 3/4 |
3/32, 1/8, 3/16 |
| 7/8 |
1/8, 3/16, 1/4 |
| 1" |
1/8, 3/16, 1/4 |
|
